Forestia floating floors are chipboards that are 16 mm thick and manufactured according to class P2. They are used as floating floors when leveling an existing load-bearing surface of raw leveled concrete, lightweight concrete elements or old board floors, before laying parquet and laminate floors, among other things. The floor construction can be supplemented with insulating boards if there is a need for thermal insulation.
Forestia Floor Extra
Forestia Floor Extra P5/P6 is delivered with tongue and groove on four sides and are intended as free bearing substrates on wooden beams or batten with c/c 0.6 m or as floating floors. Forestia Floor Extra P5 is installed in rooms where the use of moisture resistant materials is recommended,e.g. in bathrooms, wash rooms, and kitchens.
Forestia Floor extra 30mm
Can be used as load-bearing subfloor on timber joists or battens, or as floating floor on other load-bearing substrates. The panels are profiled with a 4-sided double profile, and they are approved for max. c/c 1000mm joist spacing. All free panel edges must be supported.
Forestia Floor Pure Extra
Forestia Floor Pure Extra P5/P6 is delivered with tongue and groove on four sides and are intended as free bearing substrates on wooden beams or batten with c/c 0.6 m or as floating floors. Forestia Floor Extra P5 is installed in rooms where the use of moisture resistant materials is recommended,e.g. in bathrooms, wash rooms, and kitchens. This product is Nordic Swan Ecolabelled.
Forestia Floor Pure Standard
Forestia Floor Pure standard delivered with tongue and groove on four sides, and are intended as free bearing underlays on wooden beams or battens with c/c 0.6 m and as floating floors. Forestia Floor standard is installed in rooms where moisture resistant materials are not required. This product is Nordic Swan Ecolabelled
Forestia Floor Standard
Forestia Floor standard delivered with tongue and groove on four sides, and are intended as free bearing underlays on wooden beams or battens with c/c 0.6 m and as floating floors. Forestia Floor standard is installed in rooms where moisture resistant materials are not required.
Forestia Floor Standard 30 and 38 mm
Forestia floors can be used as load-bearing subfloors on timber joists or battens, or as floating floors on other load-bearing substrates. The panels are profiled with a 4-sided double profile, and they are approved for max. c/c 1000mm joist spacing. All free panel edges must be supported.
Forestia Pro floor extra
Forestia Pro floor extra with click profile for easy installation. With handy format and weight, the floor can be mounted by one person.
Forestia Pro floor standard
Forestia Pro floor standard with click profile for easy installation. With handy format and weight, the floor can be mounted by one person.
Forestia Renovation floor
Forestia Renovation floor are thin chipboards manufactured according to class P2. Areas of use are when leveling existing load-bearing and even wooden surfaces before laying parquet, laminate flooring, linoleum carpets or needle felt carpet.
Forestia Sound-reduction Floor
Forestia Sound-reduction Floor P5/P6 is supplied in thicknesses of 22 mm with tongue and groove on four sides, and has milled slits to provide an opening to the air underlay. Forestia Sound-reduction Floor P5/P6 is used on wooden beams where there are noise reduction requirements. When selecting a sound-reduction floor solution with floating underlay on sound reducing board, the greatest sound reduction is obtained if the underlay is open to the air.
Forestia Sound-reduction Floor Pure
Forestia Sound-reduction Floor Pure P5/P6 is supplied in thicknesses of 22 mm with tongue and groove on four sides, and has milled slits to provide an opening to the air underlay. Forestia Sound-reduction Floor P5/P6 is used on wooden beams where there are noise reduction requirements. When selecting a sound-reduction floor solution with floating underlay on sound reducing board, the greatest sound reduction is obtained if the underlay is open to the air. This product is Nordic Swan Ecolabelled
Forestia Thermo Turn board
Forestia Thermo Turn board for hydronic heating. Save yourself the job of milling u-turn grooves.
Forestia Thermofloor extra 25mm
Forestia Thermofloor P5/P6 is part of a system for waterborne underfloor heating. The chipboards are manufactured according to class P5/P6 and can be used as a load-bearing subfloor on wooden joists, or as a floating floor on existing load-bearing substrate for laying parquet and laminate flooring.
Forestia Thermofloor Pure extra 25mm
Forestia Thermofloor Pure P5/P6 is part of a system for waterborne underfloor heating. The chipboards are manufactured according to class P5/P6 and can be used as a load-bearing subfloor on wooden joists, or as a floating floor on existing load-bearing substrate for laying parquet and laminate flooring. This product is Nordic Swan Ecolabelled
Forestia Thermofloor Pure standard
Forestia Floor Extra P5/P6 is delivered with tongue and groove on four sides and are intended as free bearing substrates on wooden beams or batten with c/c 0.6 m or as floating floors. Forestia Floor Extra P5 is installed in rooms where the use of moisture resistant materials is recommended,e.g. in bathrooms, wash rooms, and kitchens.
This product is Nordic Swan Ecolabelled
